Jump to content

Technical Drawing Or Cad Model - Pinto


Guest bigC

Recommended Posts

Would anybody have technical drawings or, even batter, CAD model of the 2.0 Pinto? Im making up a bracket for a vr sensor and Im wanting to double check my measurements before knocking it up at work.

 

Unless someone has a made up bracket without a home?

Link to comment
Share on other sites

This is how I did mine.

 

Mounted the trigger wheel on the back of the crank pulley:

Created a shoulder to mount the trigger wheel on with a lathe

post-347-0-35941800-1522264471_thumb.jpg

Trigger wheel was spot welded once position decided

post-347-0-94604700-1522264478_thumb.jpg

 

Made an adjustable bracket for the VR sensor:

post-347-0-47748200-1522264486_thumb.jpg

post-347-0-97884500-1522264492_thumb.jpg

post-347-0-61612300-1522264500_thumb.jpg

 

VR bracket bolts to bottom of engine:

post-347-0-85508700-1522264506_thumb.jpg

 

Nice and neat and has worked perfectly for the last 12 years.

Link to comment
Share on other sites

It didn’t cross my mind to mount the trigger wheel on the inside of the crank pulley. Tighter I can get that bracket to the lump, the less noise from the sensor.

 

Cheers for the info

Link to comment
Share on other sites

Mounted my trigger wheel on the front with a turned shoulder on the pulley wheel and elongated slots for position adjustment bolted on using the holes in the pulley. Used 10mm ally plate out of the scrap box to make the bracket. The whole assembly is rigid and doesn't vibrate

 

post-11418-0-06912000-1522348693_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...