Jump to content


Photo
- - - - -

Hazard Lights

Hazard Robin Hood 2B Indicator

  • Please log in to reply
4 replies to this topic

#1 GCash

GCash

    Newbie Builder

  • RHOCaR 18
  • 2 posts
  • Location:Blackpool
  • Car type:Robin Hood 2B

Posted 04 January 2018 - 03:13 PM

Hello

 

I am just in the process of completing a Robin Hood 2B that was given to me in a part finished state.  I am progressing well and have just finished sorting the electrics.  However, I have noticed that when I press the hazard switch the indicator warning lights don't flash.  The indicator lights themselves work and the hazard switch lights up, I just don't know if the dashboard warning lights should flash.  The indicator lights and the warning lights work correctly when using the indicator column switch.

 

It is based on a 88 Ford Sierra 2.0L OHC, can anybody help please?

 

Thanks

Graeme



#2 theduck

theduck

    Chairman

  • Admin
  • 3,603 posts
  • Location:Birmingham
  • Car type:Sierra S7

Posted 04 January 2018 - 03:49 PM

Hi Graeme, as long as the indicators and hazard switch flash thats fine.

#3 florin metal works

florin metal works

    Hants & Dorset Area Secretary

  • Area Secretary
  • PipPipPipPipPip
  • 7,802 posts
  • Location:Salisbury
  • Car type:2B+

Posted 04 January 2018 - 04:25 PM

It's a different permanent live feed for hazards so your dash direction warning tell-tales must be wired to a part of the circuit ( hazard/indicator ) which is isolated by the hazard switch.



#4 IanS

IanS

    Wheely good builder!

  • RHOCaR 18
  • 514 posts
  • Location:Warrington
  • Car type:exmo

Posted 04 January 2018 - 08:48 PM

If you only have one indicator warning light then it often is wired between the indicator lights so that the high wattage lights on the non flashing side earth the dash warning light.

When the hazard lights are selected then both sides flash at once thus preventing the dash warning light working.

As long as the hazard warning light flashes then this is OK and like a lot of production cars befor CANbus fitment.



#5 GCash

GCash

    Newbie Builder

  • RHOCaR 18
  • 2 posts
  • Location:Blackpool
  • Car type:Robin Hood 2B

Posted 05 January 2018 - 09:35 AM

Magic, thank you all for your replies







Also tagged with one or more of these keywords: Hazard, Robin Hood 2B, Indicator