Indicator Stalk

[Guest Barry Knowles]

looking for a good indicator stalk and hazard . ford seirra 1989 the one with no horn on end.

[Guest 2b cruising]

A bit like rocking horse poo mate.

[fry61]

If yours is broke try cleaning it -- worked with our duff unit.

[Guest Barry Knowles]

If yours is broke try cleaning it -- worked with our duff unit.

its just the hazard switch, keeps popping up

[Bob Tucker]

Duct tape......

[fry61]

Maybe just the plastic cowl is fouling the switch -- does it still happen with the shroud removed?

[Guest Barry Knowles]

Maybe just the plastic cowl is fouling the switch -- does it still happen with the shroud removed?

yes going to strip it tomorow

[Guest JammyJim]

Had same problem kept searching and got one from auction site for a tenner,don't think he knew how scarce they are.

[Guest Barry Knowles]

A bit like rocking horse poo mate.

found one pick it up saturday. he has got 4 seirras for scraping

[Guest 2b cruising]

found one pick it up saturday. he has got 4 seirras for scraping

If one of them is on rear discs, get them mate. Get rid of a load of dead weight.

Been stripping a spare rear end today and the weight off all the drum brake stuff is well heavy.

Just make sure you get the right sizes for front to rear balance though Barry.

And if you do get some, make sure you get the full caliper to hub anchor system. Can be a bit of a bugger to get all matching stuff.

[Guest jelleyhead]

I had this problem myself. The hazard switch was moving forward all the time as the plastic had worn away/ broken so the little metal finger on the back was not holding it in place. I made a plastic L bracket and used some strong glue to hold it in place works a treat .