Webber 36/38 Carb

[Stewart]

How do I adjust the fuel air mixture when there is not an ajustment screw as on my previous carb

[Bob Tucker]

part no 58.....

http://www.carburetion.com/diags/3236DGAVDiaginfo.asp

[Stewart]

The idle adjustment screw item 58 is blanked off on mine

[biksz]

Put a pic of carb on if its same as mine i will take a pic and show you where it is

[maccavvy]

It may have a plastic blank plug over it

[Stewart]

Took pictures but its says wont upload file to large,how do I make them smaller???

[theduck]

Use photobucket and copy the img link and post it on here

[Stewart]

Put a pic of carb on if its same as mine i will take a pic and show you where it is

Mine looks like this item on ebay 251276153742

[Stewart]

Thanks to CMA RHOCAR for info on how to resize photo`s

[biksz]

its not the same as mine but i got a manual with pics in its looks like it is still blanked off.the first pic to the right of the idle srew is a blanked off hole.your carb looks to be put on different to mine to.my throttle is on the other side.

[Guest mower man]

I think the carb is mounted a about f !!! the throttle linkage should be facing the bulk head , it is on most fords so you may be looking in the wrong area [ this is not a get at by the way ] the photos had me doing some head scratching! . The idle mixture screw is on the side of the carb facing the manifold . this may be me having a wrinkly moment but I think I am correct mower man

[Peter Bell]

I agree with Mr. Atco, I like the throttle disc btw.

[Bob Tucker]

Never seen one that way round....

[biksz]

have you managed to sort the mixture out?

[Stewart]

have you managed to sort the mixture out?

No not yet but have been recomended to a guy who lives fairly close who prepares pinto race engines,he has told me to take it to him (when its dry) and he will tune it so here`s hoping,watch this space!