Jump to content

  2. → Viewing Profile: Topics: Paul94

Paul94

Member Since 06 Jun 2012
Offline Last Active 18 May 2013 09:14 PM
-----

Topics I've Started

Fuel Regulator On A Zetec

12 January 2013 - 04:32 PM

    Hi all,
    I wonder if someone can help? I am in the process of installing the fuel system to my Zero. The standard Ford fuel regulator has a nylon pipe running from it's lower extremities. I am not sure where it should be connected. Does anyone know if this is needed or where I should connect it?
    Many thanks
    Paul94

Drive Shaft To Prop Shaft Linkage

07 August 2012 - 12:41 PM

Another simple question from someone without an automotive entering background....

Having installed both rear drive shafts, I can understand why they can (almost) independently rotate. This is the main purpose of the differential and allows one wheel to move at a different speed to the other so you can go around corners. What I didn't expect was that turning the prop shaft did not turn the drive shafts. It rotated freely and seemingly had no effect on the drive shafts. I was expecting some sort of direct linkage.
Is this normal, or do I have a problem with the diff?
Paul94

Differential Breather

05 August 2012 - 09:15 AM

Hi all,

Just started a Zero build. This is my first build and first post on this forum, so excuse the dumb questions.
The diff is now in place, but I have noticed in other blogs that some diffs have small breather pipes, but mine does not. Is this a problem?

Some Photo's attached

Many thanks
Paul94
http://paul94-gbs-ze...blogspot.co.uk/

  1. RHOCAR Community
  2. → Viewing Profile: Topics: Paul94

  1. Printfetti - Your photos on Confetti
  2. |
  3. E-Mail Remind - Reminders by email