Hi Phil, how you doing?
I'm after the steering cowling and the hazard lights button. Any chance you've still got them?
Chris
- RHOCAR Community
- → Viewing Profile: Posts: Bell Boy
Community Stats
- Group Community user
- Active Posts 6
- Profile Views 964
- Member Title Newbie Builder
- Age 22 years old
- Birthday October 12, 1990
-
Gender
Male
-
Location
Kingston Upon Thames
Previous Fields
-
Car type
GBS Zero
-
Full name
Chris Bell
Contact Information
Posts I've Made
In Topic: Ford Sierra Saph 1.8 Estate Breaking
28 December 2012 - 01:47 PM
In Topic: Breaking Gbs Zero. Zetec
12 September 2012 - 08:49 PM
Hi Femi,
I'm interested in the brake master cylinder + reservoir, steering cowling & the radiator. I'll pm you some questions.
Chris
I'm interested in the brake master cylinder + reservoir, steering cowling & the radiator. I'll pm you some questions.
Chris
In Topic: Can I Change The Sump With The Engine In?
30 March 2012 - 06:37 PM
Dave...you've been PM'ed. and cheers for the helps lads, I've ordered the wiring loom and fuel kit to work on over Easter.
In Topic: Can I Change The Sump With The Engine In?
29 March 2012 - 10:01 PM
iank, on 29 March 2012 - 09:08 PM, said:
you should be able to take the old sump and wind age tray off ok
2 points to consider
1. how old is your zetec? if it's an old one raceline require the crank bolts shortening , newer zetecs are ok
2. to refit the raceline sump you'll need a longggggg Allen key (6 inches) to fit one of the rear bolts that's completely enclosed between the sump and the bell housing
ian
2 points to consider
1. how old is your zetec? if it's an old one raceline require the crank bolts shortening , newer zetecs are ok
2. to refit the raceline sump you'll need a longggggg Allen key (6 inches) to fit one of the rear bolts that's completely enclosed between the sump and the bell housing
ian
1. It's a crate engine that I got from GBS over the winter so I believe it's not an old one.
2. Noted...but I won't worry about it too much at the moment.
Cheers for the advice lads!
In Topic: Adhesive Views
31 October 2011 - 11:34 PM
Hi guys, has anyone had any problems with just using adhesive? I picked the kit up a few weeks ago and haven't decided yet. GBS seem to mostly use just glue, but it seems every build I see has a bunch of rivets in.
- RHOCAR Community
- → Viewing Profile: Posts: Bell Boy




Find content
