Engine
Won't fire, won't even turn? Not running smooth? Cutting out? Ask here!
6,152 topics in this forum
-
we got it up and running yesterday the first time i have heard it running as bought with engine and box out, very pleased๐ no smoke, no rattles, all went well after sorting out the gbs new loom thanks to help from richy, now on to making new dash refit wings new lights ect ect ect fingers crossed hoping to mot end of month
-
- 0 replies
- 779 views
-
-
Picked my Robin Hood up this morning. It has a new vetec blacktop engine. Has anyone done the startup procedure on this? Any tips would be helpful.
-
-
- 8 replies
- 1.6k views
- 1 follower
-
-
-
- 0 replies
- 794 views
- 1 follower
-
-
Evening all, I have been having some running issues with my 2.0 pinto running r1 carbs. Start, Tickover and full throttle runs great but when just feathering the throttle to maintain speed or ever so slightly increase speed it splutters randomly. Itโs become worse just lately and is more Prominent when the engine is hot. now Iโve been thinking itโs a carb related issue but I lifted the bonnet earlier when the car was ticking over and the distributor is wobbling. Almost moving round in a circular motion so Iโm thinking the spindle may be bent. Hence causing a missed spark. Iโm pretty certain there shouldnโt be any movement with these from side to side? Also notic…
-
- 1 reply
- 817 views
-
-
I need to replace the electrical oil pressure switch on a 1993cc Ford sierra, 1984. Because the donor car was scrapped I cannot order parts by the registration. So when I google the switch for my car - it gives you a choice of three different colours. Red Blue or white. The existing switch colour is black. Anyone any idea what colour I should use?
-
- 6 replies
- 1.5k views
-
-
Hi i have a 2B with pinto engine fitted. engine doesnโt sit level ,front end sitting lower. any advice on whether it should sit level.?
-
Hi all I am having problems finding a coolant hose for top of radiator to thermostat for my 1.6pinto exmo. Its 180ยฐ hose of that makes sense. Thanks in advance
-
- 4 replies
- 1.1k views
-
-
Morning, Hope everyoneโs having fun tinkering, I certainly am :). I have a question about changing a throttle cables ratio. I am not sure what to search for/solution to implement and wondered if anyone could help. I have a duel throttle supercharger setup which is now working fine. The problem I have is I am not able to get full throttle travel on the supercharger throttle. This is because the throttle on the inlet is fully open. Both cables are attached to the pedal so move at the same time. Iโve read about leaving slack on the supercharger cable but thatโs only when the throttle opens too quickly; I have the opposite problem. Do I need to fi…
-
- 3 replies
- 1.1k views
-
-
Hello all, this is a continuation of a couple of threads that I started a few weeks ago. So, Sierra S7, 1.6 pinto engine. New fuse box. Fresh petrol. Recently serviced ford VV carb (yes I know ๐...) new starter motor and battery. I've got to the stage where I get ignition and the engine turns over a few times (sounding quite healthy), and then peters out. Try to restart and the same happens. sometimes farting and coughing from the carb as it runs down. I'm reading up and doing web searches, but any ideas would be most welcome. Thanks all!
-
-
- 19 replies
- 3.4k views
-
-
does any one use a expansion bottle on a 2l sierra set up or just a rad with std fan ?
-
- 24 replies
- 3.6k views
-
-
I have my zero running quite nicely these days. All re-trimmed inside, everything working well, temperatures are all healthy etc. It drives a treat and the fuelling is good too, but starting can be a bind. I have a new battery fitted and cranking voltage stays around 11v so thatโs all ok, I have two earths to the block, one from the battery direct and one via the chassis, and the positive conductors are clean 35mm CSA, electrically itโs as good as it gets. I have questioned the starter motor, it seems to be a bit slow turning over some times, but my biggest suspicion is mapping. I have an emerald K6 and it was mapped by Aldon Auto, I have had Motec ECUs in t…
-
- 7 replies
- 1.8k views
-
-
I have a basic set up. 1600 pinto with a Weber carb, original machanical pump and regulator. Up till now I have relied on the tiny mesh filter in the carb. I think it's time to fit a proper in line one. Best place to fit it? For convenience and easiness to see I would fit it between the regulator and carb. Could fit before the mechanical pump and regulator though. Is there any benefit either way? Cheers David
-
- 2 replies
- 880 views
- 1 follower
-
-
Super spec back on the road, ankle repaired and it hasnโt stopped raining for 2 weeks! So whilst Tuning at Raw speed I noticed I have a rumble from the transmission and sometimes a knock on initial acceleration or deceleration. Checked the play by rotating the hubs and holding the prop still and I have a slight bit of play. So first question is how much is too much? where is the play most likely to be coming from? (Diff shims?) what grease should I use on the CV prop joints? any help very much appreciated.
-
- 11 replies
- 1.7k views
-
-
I have just been to Raw speed tuning in Plymouth and been refining my ECU set up. I have a knock on acceleration and deceleration which hopefully can be heard on the video, seems a bit excessive comments please. Geordie40 says check UV bolts and grease and? Ended up with 167hp And 158 ft/lbs torque at the wheels around 10psi boost. is this pretty much what is expected? (with cat still in situ) so maybe around 210 at flywheel.
-
I have seen a nice looking completed B2 for sale. I have been looking for a while and this car seems nicely finished. It is fitted with a 2.8 v6 power unit and this appears to be a bit rare, is this because it has an adverse effect on the car overall, obviously it will be heavier and may upset the balance somewhat. I am seeking assistance from you experienced owners as to the pro's and con's. Thank you all for taking time to read this, take care, regards,Brian
-
- 5 replies
- 1.4k views
-
-
I have done a fair bit of work to the zero lately, added strength to the peddle box surround to make sure the throttle cable doesnโt flex it, fitted a oil catch can, re-routed some wiring and spotted an oil leak whilst I was doing it so fixed that (new CAS seal), adjusted the aux belt so it doesnโt scream on cold start, re trim of the interior and decided to make all new stronger tins whilst I was on, re packed the exhaust, did a compression check and got 160, 163, 161, 161 so very happy with that, re gapped the plugs whilst they was out from 0.75mm to 1mm and cold start is now much better. Next on my list is to fit a header tank and swirl pot for the coolant system on…
-
- 0 replies
- 749 views
-
-
I have a 2.0L pinto fitted with a new OE mechanical fuel pump but I cannot get the plastic in line fuel filter fitted between the pump and the carb to retain any petrol. If car stands for more than a week the petrol evaporates and it takes an eternity of pouring fuel down carb chokes to fire engine up several times to pull fuel through, even then only spurts of fuel from fuel pump can be seen entering filter, is there any way to bleed fuel system
-
- 4 replies
- 1.2k views
- 1 follower
-
-
Hey all Ive finally finished a load of jobs over the winter and Iโm fairly happy with the car now. Next project will be more about improving performance of the engine. Itโs a 2l pinto from a Sierra gl and I know thereโs lots of gains to be had. But before I invest to much in pinto specific upgrades, is there a way to know if the engine is sound or not? Iโd hate to start with new cams, carbs etc and then find out the engine was on its way out. it runs good, a bit smokey when cold but soon clears (passes mot each year), performance ok across the whole band, no reason think thereโs something wrong with it but when it comes from a b reg car I have doubts.
-
- 1 reply
- 797 views
-
-
Looking for a 2ltr Pinto carb manual choke and throttle linkage
-
- 1 reply
- 800 views
-
-
Hi I have just bought a tiger kit car with a standard 2.0 pinto engine fitted. Im having a few problems with misfires and odd backfiring under acceleration. I have checked usual things float height, timing, plugs, ht leads etc. with no luck. It has a 32/34 dtml carb fitted I was just wondering if it is jetted correctly. I am going to upgrade at sometime to a better carb but for now just wanted to use this if its ok. the jets in it are primary idle 55 secondary idle 60 primary main air 165 emulsion f30 main 125 secondary main air170 emulsion f22 main 117 does this seem ok for this engine tried trolling the net but i cant fi…
-
- 4 replies
- 2.5k views
-
-
My throttle cable is connected to the pedal using a device which uses little grub screws to hold the cable in place. It's been working fine but I came to adjust it and the screws have effectively damaged the wire, snapping a few strands. Has anyone bought/made something that works and doesn't mangle the wire?
-
- 2 replies
- 934 views
-
-
Hi, I have looked on the internet and I am getting different results. Does anyone know the torque setting when fitting ERA sump to ST170? I have to undo 4 main cap bolts to fit the windage tray. Any help appreciated. Thanks Mark
-
- 12 replies
- 5.4k views
-
-
My Haynes runs the original Sierra fuel system, namely the mechanical fuel pump connected to what is called in the manual a fuel flow regulator/vapour separator. the system has a fuel return pipe to the tank, I am sure I read somewhere that back in the day this regulator was bypassed when a fault was suspected. I can't see any reason on a system like this to run a regulator or a fuel return and would prefer to remove it has the pipework is not very well run. Anybody got any input?
-
- 2 replies
- 1k views
-
-
Hi I am thinking about building my own exhaust well at least from the 4 into 1 collector so just the cat {or decat for after MOT's) and the silencer now bearing in mind I can't weld so is it just a case of buying the relevant parts and clamping them together. Looking at all stainless parts and using lap or butt joint type clamps. Has anyone made their own this way and if so can I have a pic please ๐
-
-
- 15 replies
- 4k views
-
-
have got a lo cost with a kent 1600 engine with twin 40 dellorto carbs. I bought a new set of bp 7es plugs.Two of them have failed No.1 and No.4. I had a couple on champion n9y and they ran ok.I heard that 1600 crossflows like the ngk. The n9y seem to run cleaner but am not sure about fitting them.the ngk have only covered 70 miles. Can some one advise please. Bill Williams.