Cbr600 Fx Or Fazer 600 Bike Carbs

[Guest craig030774]

any preference for above bike carbs dont know a great deal so asking the people in the know

[Guest gdc]

any preference for above bike carbs dont know a great deal so asking the people in the know

 

hi i have fireblade carbs for the 1700 xflow

and gsxr 750 carbs on the zetec the zetec runs well when warm but is a pig to start as the carbs should have an electrical pre warm as on the bike, but when warm the throttle response is amasing, now just the sva emmisions to pass .

regards graham

 

both manifolds from boggs superb engineering but a long wait to be made.

[Guest Takumi]

Bike carbs are as smooth as silk, compared to traditional Webers..

 

I would 'had' Fazer 600 carbs on my 2.0i Pinto engine, and found the great, maybe a tiny bit less top end compared to the single 32/36mm DGV carb.. but in the mid range, ten times better..

 

If you have trouble starting, maybe try fitting a manual choke cable to actuate the starting enrichment valves on the carbs, I had mine held open with some wire, started easy peasy, but ran over rich..! and failed the mot.. scratched my head for ages before twigging that was it..!lol

 

 

-tk

[Guest craig030774]

cbr 600 carbs on way to me £14.99 plus stamps from ebay

[Guest Takumi]

cbr 600 carbs on way to me £14.99 plus stamps from ebay

 

 

Excellent price!

[Guest adame]

cbr 600 carbs on way to me £14.99 plus stamps from ebay

 

I nearly bought those! let me know how u get on with em!

-Ad

[Snapperpaul]

Carbs off a GSXR on mine, 38mm, think they are from a 750.

2 psi through a Fuel King supplied by a Facet silver top, runs as smooth as silk but i may need to sort the jetting out for SVA.

Also have a MegaJolt for the spark.

[Guest erichetherington]

If you are still looking for a set have a look here; http://stores.ebay.co.uk/bikebits-r-us-shop

just put carbs. in the sop searce.

[miikae]

Just found these two sets on ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...A:IT&ih=001

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...A:IT&ih=012

if of interest to anyone

 

Mike

[Guest craig030774]

just won a SET OF FAZER 6OO CARBS £1.20

[Guest Ian & Carole]

just won a SET OF FAZER 6OO CARBS £1.20

 

 

HAPPY CHRISTMAS Craig !!!!!!!!!!!!

 

 

Eric stop dropping your H's

 

Ian J

[Guest mizurage135]

hi got twin 40s to fit to newly built 2.1 p1nto stage 2 head,electronic ignition, what is involved in the fitting of bike carbs,what other parts required, what are the benifts, any difference in bhp. what are best carbs to use thanks mike

[Guest craig030774]

from what i understand same problems as dc 40s but much cheaper.

 

basically i have bought 2 sets 1 fzr 600 and cbr600 to play with

 

keeping vacuum for dizzy and servo and breather with4 small pipes coming off each inlet into a tank to take the ancillaries off

 

bit of trial and error

 

also going to put main jets in lathe and drill out to 1.7mm as this seems to be the recommended size

 

hope it answers your question

 

raig

[Guest Takumi]

I've just ordered a set of 1.75mm drills

 

if anyone wants 1 for rejetting a set of bike carbs, pm me.

[Guest craig030774]

I've just ordered a set of 1.75mm drills

 

if anyone wants 1 for rejetting a set of bike carbs, pm me.

 

where did you manage to get them from went to local model shop today and they only did them in sets

 

how much for you to send one to grimsby lincs

cheers

craig

 

btw cbr carbs arrived on christmas eve got part of flange made out of stainless

 

and measured up carbs to pinto head

 

10mm offset on 2 & 3

40mm " " " 1 & 4