Manifold

[Guest iligitamate2b]

does anyone know if a 32/36 dgav will run on amanifold off a 1600 pinto.

and does anyone no if there is a component from robinhood that does the job its supposed to,ive just startes putting back the ancillaries on my engine when i got to the spark plugs supplied in rh overhaul pack they were not just the wrong size.any smaller they would have fallen into the engine.(thts enough moaning for one night).

[Mitch]

Not sure about the manifold, but by the sounds of it i also had the same spark plugs as you (BCPR6ES) a quick call to RHE and the sent the correct ones out.

HTH

Mitch

[Guest chrisg]

No I don not beleive it will. When I bought my exmo I got a nearly new 32/36 but when attemting to fit it found that the manifold was too small andobviously off a 1600.

 

Hope this helps.

[Guest Alan Harrison]

You need a manifold from an very early Sierra or a Cortina/Capri. I'll try to take a snap of mine so you know what to look for at the scrappy.

[Guest iligitamate2b]

cheers lads, im off down the breakers sunday with a list as long as my arm,oh and the sparkplugs are going in the skip with the rest of the kit thats no blo*dy good

[Peter Bell]

The Carb fixing stud centres for DGAV and DGAS are approx. 92 x 45mm, don't forget granadas and transits may have the correct manifold.

Peter.