Column Switches Question

[steve_wilson]

hi all,

 

my vicky green wiring loom comes with these connection on it to connect the column switches to

 

i remember from a previous 2b build (autosparks wiring loom) that switches from a 1999 fiesta plugged into there and all worked great (they came with the kit)!

 

what i'm after is the cable that goes from the back of the fiesta column switches and plugs into these two connections.

 

anyone know where i can get one or what i can get them off?

 

Thanks

[Guest smartfazer]

Erm.............a Fiesta? :D

[steve_wilson]

lol, i've checked fiestas and i cant find such a connector anywhere on the loom, i think the cable is a vicky green/autosparks creation. could do with getting hold of one really!

[Guest piddy]

I seem to remember helping a friend wire his 2B up a few years ago.

It had a Vicky green loom, and I believe the connectors fitted onto mk four Escort switches. Whether they are the same as Fiesta ones I don’t know. Failing that you could get some switches with the correct connecters, cut the connecters off on the Vicky green and splice the two together.

[Grizzly]

Hi Steve,

I remember these on my VG loom.

Couldn't fathom what they were, so cut them off and did without.

Soldered straight through to the relevant wires from the stalks etc.

[spg]

With the VG loom you should have got the other half of the multi blocks, To patch into the ford conectors. If you did'nt get them go with grizzly's plan and solder them together, Or get some new multi blocks.

 

 

Steve

[johnlrichardson]

My V Green loom didnt come with them,they were an addition and came with multi-plugs and 2 relays a small wiring harness which had to be soldered to the multi-plugs

 

HTH jon

[Guest JimMearns]

The connectors look like tyco or molex housings. The pins, sockets and housings are all available (quite cheaply) through www.Farnell.com

This will get you to the main website and then you can look at the uk one. Hope this helps.