Jump to content

Steering Rack Mounts


Knock-on

Recommended Posts

Hi everyone

 

I'm pleased to announce that production has re-started on the Escort Steering Rack mounts and they will be available for £29.95 + £2.95 P&P. We have a few Red anodised sets left over from a previous batch but the new ones will be plain Ali.

 

Sierra Steering Rack mounts are also ready and I will take a few snaps tomorrow and post on here. However, the Sierra ones are £39.95 + P&P. This is because the come with the spacer to raise them and high tensile bolts for fixing while the Escort ones are just as shown in the picture. As with the Escort ones, they are manufactured from a single Ali billet and CNC milled to fit the peculiar Sierra mounting points.

 

All prices are inclusive of VAT.

 

Any questions please let me know.

 

Returns policy:

In the event of a manufacturing defect, we will replace free of charge including postage both ways.

If you wish to return for other reasons, we will refund the cost of the Mounts only (i.e. no postage) minus 20% handling charge if they are in the same condition that they went out.

 

We hope you think this is fair to both parties and that will be happy with your purchase.

post-1962-1262623545_thumb.jpg

Link to comment
Share on other sites

  • Replies 32
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 weeks later...

OK, here are the Sierra Clamps.

 

As you can see. there is a lot more materials and work that go into the Sierra mounts and they come complete with high tensile bolt and spacer block for the 2b.

 

We are also offering a 10% discount to RHOCar members saving up to £4 on the cost. If you have a Lemon flash against your name, then you win :) Even more reason to join the Club.

post-1962-1264165366_thumb.jpg

Link to comment
Share on other sites

Please, please, please notice the difference between the 2 sets of mounts.

 

The Escort ones have a round mounting at either end as in the picture of the rack (red mounts) while the Sierra ones have a round one and a triangular one to fit that specific rack (silver mounts).

 

If you have ANY questions or concerns, please ask me first or post a picture.

 

Regards

 

Larry

post-1962-1264165664_thumb.jpg

post-1962-1264165805_thumb.jpg

Link to comment
Share on other sites

Just trying to get some feedback about these mounts as quite a few people expressed interest in changing the unsightly U bolts for proper mounts.

 

Is this a good product for members or is there something else we should be supplying?

 

I've got them on mine and they look the Mutts Nuts, don't damage the rack case and hold everything most securely.

Link to comment
Share on other sites

Hi Larry,

 

Many thanks for your very prompt service, as you say, they certainly look the Mutt's Nutt's.

 

Pic enclosed of them resting in place ready to fit.

 

Thanks again, :good:

 

Nick.

 

Glad you like them. As a professional machinist, your compliment is even more appreciated. :)

Link to comment
Share on other sites

Hi Sharky

 

Send me a PM and I will forward details for PayPal.

 

Please clearly identify which rack you have from earlier in the Thread. Feel free to post a picture if at all unsure.

 

UPDATE

 

Madasafish requested the Sierra ones have the square edges rounded on the large mount. We cannot round it completely because of the way the high tensile bolt goes through the rack guide but think they will look aesthetically better with the edge rounded.

 

This modification will be done during the week but from now on, the Sierra mounts will have slightly rounded edges UNLESS YOU SPECIFICALLY REQUEST SQUARE ONES.

 

As soon as the mod is completed, I will post a new picture.

Link to comment
Share on other sites

Hi mate

 

Drop me your details in a PM including your address and I will send you a PayPal address to send the money along with my contact details.

 

If you are at all unsure which clamps you require, post a pic of your rack and I will identify it.

 

Cheers

Link to comment
Share on other sites

Guest madasafish

mine arrived today. well chuffed. chuck away the bulldog clamps and 1" box section and invest in a pair of these mounts. here are some pics of them sitting in place. please excuse the cr4p underneath the car.

post-3658-1265412297_thumb.jpg

post-3658-1265412354_thumb.jpg

post-3658-1265412367_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...