Hose Ends

[Thrashed]

Hi All

 

getting to the stage were i need to get the engine started, but have an issue.

 

The Pinto has a few hose outlets that i want to blank off. 1 that comes off the thermostat housing, 1 that comes of the inlet manifold and 1 by the water pump.

 

The original rubbers have perished and are no good, but i can not find a suitable replacements anywhere.

 

Does anyone know of a supplier or a good alternative. Did think about a bolt in the end of each one, but not sure this is the best idea.

 

Ideas or info welcome.

 

Thanks guys

[Guest doddy]

you can use these they come in lots of sizes

http://cgi.ebay.co.uk/CNC-ALLOY-HOSE-BLANKING-BUNG-PLUG-BOV-VALVE-10mm-3-8-/280506585074?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item414f7ecff2

[Thrashed]

you can use these they come in lots of sizes

http://cgi.ebay.co.uk/CNC-ALLOY-HOSE-BLANKING-BUNG-PLUG-BOV-VALVE-10mm-3-8-/280506585074?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item414f7ecff2

 

Thanks, just what I needed.

 

Cheers

[MarkBzero]

Great find Doddy I'll have to get some.

Regards

Mark