No Vac Dizzy

[Guest DR Jones]

hi there,

 

does anyone have or know of a place to get a no vac dizzy for a 2.0ltr pinto. or a megajolt lite jr kit would do. i am fitting bike carbs so will have no vac takeoff.

 

many thanks

 

Dan

[Peter Bell]

Dan unless you want to get sophisticated, the 'normal' practice is just to use the dizzy without the vac connected. you still have the centrifugal advance which will give all the advance you need. The vacuum advance only works at idling and low throttle openings to improve fuel consumption and driveability but you will find that bike carbs are very smooth anyway. Otherwise I think the ESCII dizzy has no mechanical advance or you could just lock up the bob weights on a standard one.

[Snapperpaul]

Have 4 vac takeover welded into the bike carb manifold then run them to a fat box sized box from there you can have two takeoffs for servo and dizzy

[Guest craig030774]

Have 4 vac takeover welded into the bike carb manifold then run them to a fat box sized box from there you can have two takeoffs for servo and dizzy

 

have you got any photos of the box and did you put non return valves in. what size is the holes on your akeoffs

 

cheers

craig