Sierra Instrument Panel

[Guest bodjit]

We have reached the stage in the build of the sub k where we are putting in the wiring.

 

We now find that the clocks out of the donor Sierra have only 12 wires.

 

This is not even recognised by the Haynes manual.

 

Does anyone know how to connect this to the Vikki Green loom?

 

HELP US !!!!

[Guest piddy]

Hi.

Am I correct in saying the Vicky Green loom is designed for the mk4 Escort dials?

If so you could borrow a Hayne manual for above .

Piddy

[Guest TerryBarry]

My '89 Sierra only had 12 connections to the instrument panel and the connections appeared to bear little resemblance to the Haynes manual.

Edited April 12, 2003 by TerryBarry

[Mitch]

Hi All

The Vicky Green loom is the new loom which you can get from RHE. For the Sierra wire's check out Jim Stotts web page under Build tip's, it list's all the clock wires and should help you wire up the dash. I think there are more than needed in the VG loom just wire the Sierra one's up. My dash works okay but i have fitted Capri clocks so not sure how many i didnt use.

Hope this Helps

Mitch