Jump to content

Dtr 2B Build


Guest Dtr36

Recommended Posts

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Guest peter2b2002

sorry dave can't help as i used the doner loom on my 2b, with luck you might be able to trace the wires from the relay to where they go

peter2b

Link to comment
Share on other sites

Neither, It's a Vicky Green loom. Just thought I'd give you the info as a guide for a basic Injection wiring.

I don't think there's any relays on the Ford engine loom and ECU wiring, but it was between 7 and 10 years ago that I did initial wiring.

 

HTH

Nick

Link to comment
Share on other sites

Not your specific question but---- if it's switched by the Sierra column switches do all you can to limit current going through them (by using relays) as these column switches are becoming very rare.

Link to comment
Share on other sites

The 4 relay holders on a Premier loom are

 

Main Beam - White output on Terminal 87

Dip Beam - Yellow output on Terminal 87

Flasher relay - relay holder with just 3 wires

Intermittent wiper relay - the one that's left.

Link to comment
Share on other sites

cheers richyb66 so none for fuel relay then

 

No, no fuel pump relay but easy enough to add extra relays if you need them. Best to get all the basic stuff in the loom connected first and then add extras afterwards.

Link to comment
Share on other sites

  • 2 weeks later...
  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...