Someone Help Make A Poll On Ride Height Etc ?

[Guest ickle]

Trying to do it on this topic to see what everyones is running on what model etc for the road

 

Model

engine

ride height frt & rear

double wishbone

shock clicks

spring weights

camber

tracking

tyre pressures

wheel size

 

 

 

[Guest mower man]

Ok here we go

1 S7

2pinto

3 undersump 4" under diff 4.5"

4 yes inboard at front swing arms at rear

5 5/6from full soft {front ] 7 from full soft [rear] fronts are spax rears are Gaz

6 fronts 120 rears std seirra unknown

7 approx 1.5 degs neg all round

8as close to parralel as pos

9normally 18 but have run 20 not alot of difference to me!

10 15 x6.5 et 38 with hancook prof 2 ,just got these scubbed in really like them !! 205 x50

thats about it its a liitle heavy 800k in touring form [usuall]

mower man

caster 6/7 degs pos

Edited August 4, 2014 by mower man

[maw]

Ickle, if you want to do this online you could always set one up on SurveyMonkey. This is free & you just share a link on here. It'll also do the analysis for you!

[biksz]

1 s7

2 2litre pinto

3 inboard front sme as mowerman

4 standard sirra r swing arms for now going to change to coil overs

5 4/5 inch at front height rr about inch

6 tyre pressures are19 all round

Edited August 4, 2014 by biksz

[alantoon]

1. Exmo with 1600 pinto

2. 4.5ins under sump, 6ins under diff.

3. Struts

4. non adjustable,

5. 180lb front, Sierra rears

6. 1 deg. neg all round

7. parallel

8. 22lb all round tried lower but had a tyre roll off the rim.

9 6.5x15 with195 Pirelli P6000