2B Sp To Wishbones

[Guest RH CAT 7]

hi all, looking at a swop to wishbones on my 2b, there seems to be a few ways to do this but whats the best? i know the sp set up works as i have pushed the 2b as fast as a bda powerd westfield i used to own, the 2b is 1600 pinto. i can make all parts- wishbones ect . is there any drawings-jigs ect for this?

[speedtripledan]

If your going to build them id get measurements off somebody elses ideally one that has the updated gbs top wishbone. You will also need a new set of hubs. Hardest job will be getting the brackets in the right place on the chassis as they arent very square !

[Guest RH CAT 7]

cheers DanE ,hubs are sorted of the bay, just need bit more info or a local hood thats had a chop!

[Knock-on]

I welded two vertical rectangular box sections between the top and bottom chassis tubes allowing me to position the wishbones in the optimal position without being compromised. I then used 2 wishbones from a catering van off ebay.