Indicator Stalk Replacement

[Guest Seanus01]

Hi,

 

Has anyone retro fitted the aluminium stalks from kitspares to replace the standard ford stalks?

 

I can't work out how it's possible without cutting the original stalk and tapping a thread. Also I assume I will need to fit a switch for the washer as it is on the end of my current stalk?

 

I'm curious to find an easy answer.

 

Sean

[fry61]

Think very carefully before doing this mod -- Sierra switches are getting scarce -- working black plastic is better than broken bling.

[Guest Seanus01]

This was my thinking to be honest, I am concerned about cutting off the stalks and not being able to find replacements should not the mod go a little wrong

 

Thanks for your help

[Guest A.B]

They're selling on eBay for £30-50. Some are even listed at £99

[Guest Neil.Pritchard]

Hi sean, I replaced my stalks with the aluminium type. As richard said cut off and tap out to m6 then bond in place with 2 pack glue.

Then fit a switch for window screen washer pump.

Cheers Neil.