Jump to content

Pinto Low Level Oil Filler Cap


Guest preeday

Recommended Posts

Guest preeday

Hi all, have any of u got a pinto low level oil filler cap you'd like to part with as I am in need of one?

 

Many thanks

 

Phil

Link to comment
Share on other sites

Guest 2b cruising

Hello Philip. I'm not quite sure what you mean by low level filler cap.

The pinto only has one filler as far as I know. That is on top of the cam cover.

The only other thing I can bring to mind is the lower hole in the block that is meant to be the breather.

Is that what you mean, or have you also got an oil catch tank.

Link to comment
Share on other sites

Guest Ian & Carole

Regular mod is to chop the filler neck off and weld a plate over the hole.

 

Go to the back of the cam cover and cut a hole in the vertical face, refit the filler neck with a 90 degree bend in it, setting the top of the filler cap at the height of the cam cover.

Link to comment
Share on other sites

Guest mower man

The early pinto engines had a short one without the breather pipe if thats what you need.

Thats what I used on my s7 ran perfectly for 12 years they are available but a search may be required mick

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...