Iva Questions

[Guest Liam225]

Hi, I'm currently attempting to get my car through its iva and I have a few questions. I can't seem to find cap covers for the big nuts on the suspension and was just wondering if someone knows where to get them. Second question is I've got a Sierra steering rack so will I need a collapsible boss for the steering wheel?

Thanks for taking the time to read the above questions and thanks for the help.

[richyb66]

Car Builder Solutions sell the IVA nut covers.

 

http://www.carbuildersolutions.com/uk/nut-covers

 

 

If you've got the Sierra column it's has a collapsible section built into it and this should pass IVA. However, some examiners like to see the complete Sierra steering system used (rack, column and wheel). If I was doing IVA again, I'd stick a Sierra wheel on for the test and swap it later.

[alanrichey]

Cheaper on EBay - Item 321348985352

[Guest Ian & Carole]

If it's the big nit on the top wish bone, I used a squash ball cut in half fitted then glued back together.

[Guest Liam225]

Cool thanks for the help.

[Snapperpaul]

Steering column should have an angle from rack to UJ near the bulkhead

Not straight