Jump to content

Zetec Water Rail Wanted


wowblaauw

Recommended Posts

Hi, many thanks for the replys. I originally used something similar to a hoover hose connected to the standard thermostat housing but having had lots of leaks etc I decided to comply to the pro version. Not only will this make the engine look good, but will be fit for purpose.

Link to comment
Share on other sites

All, thank you for all of your efforts in trying to coerce me into 'home made' efforts. Well I did this with a stock Ford thermostat and housing and used various bendy bits to connect my own rail and various other scavenged parts - I'll take a picture when the temperature gets above -1c so you can see what I mean. In the end I bit the bullet and succumbed to the GBS offering and ordered a kit this afternoon to be delivered next week. I just wanted to thank the energy and the imagination of this forum and the Hoodies - I did start with a 2B and in the end went over to the dark side and bought a GBS Zero. Happily in love with my mucky hands, ripped jeans, bad back and neck and of course the constant cuts and bruises to hands and other accoutrements with the constant changes and maintenance of being a kit car owner.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...