Jump to content

Removing Exhaust Manifold S7


Matt brown

Recommended Posts

Put a jack under the sump and remove the engine mounts. The engine can then be tilted/raised/lowered which might just work. The engine is very unstable like this!!! I remember getting the manifold out with a lot of fiddling and not being able to get it back in. Eventually took the head off.

 

Nigel

Link to comment
Share on other sites

Take out the studs holding it to the head.

Remove the engine mount exhaust side (after putting a jack under the sump!)

unbolt brake master cylinder from servo and lift about one inch.

Then can be just jiggled out.

At least this works for me.

Link to comment
Share on other sites

*Update*

 

So managed to get it out removed the master cylinder and moved the steering shaft made just enough room, for some reason I couldn't get the top nut of the engine mount to loosen it was on there good and propper. But have a bigger problem now I have got a massive split in the pipe where it is welded :(

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...