Jump to content

Bonnet scoop


Vaughan

Recommended Posts

I am fitting a Sierra DOHC into a monocoque. The engine inevitability sits high. Does anyone have any info or recommendations on sourcing a scoop and it’s iva implications?

i need about 700mm at the front, 400 wide 850 long. 

TIA.

Vaughan 

Link to comment
Share on other sites

got it from ebay

size wise its 

410mm across the front

530mm at its widest point towards the back

530mm front to back

6omm at highest point at front tapering down towards the back

My engine sits 40mm above bonnet

The scoop needing a bit of fettling as the fixings had to be glued and a bit of plastic webbing removed

HTH

 

cheers Paul

Link to comment
Share on other sites

10 hours ago, ZeroKnowledge said:

got it from ebay

size wise its 

410mm across the front

530mm at its widest point towards the back

530mm front to back

6omm at highest point at front tapering down towards the back

My engine sits 40mm above bonnet

The scoop needing a bit of fettling as the fixings had to be glued and a bit of plastic webbing removed

HTH

 

cheers Paul

Thanks Paul

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...