Zero engine mount rubbers?

[keith kelly]

Looking to replace the square ish engine mount rubbers on the zero as they are too soft and engine moves too much for my liking. I have some that I thought were Land Rover ones but the thread is different. Any recommendations 

[MarkBzero]

I used Landover mounts 10mm thread, both sides OEM part number NRC9560.

Cheap enough on eBay.

[theduck]

Second marks recommendation, is what I am using on the 100e. 

[keith kelly]

That’s what I thought I had but thread is not blooming metric grrrr will try some others thanks

[knights_templar]

On 4/9/2020 at 10:38 AM, keith kelly said:

That’s what I thought I had but thread is not blooming metric grrrr will try some others thanks

Careful with engine mounts, I have seen to MT75 bell housings crack where the gearbox and or engine mounts have been changed for a different mount to the Zero standard.

I would talk to Richard