Kit Spares Boot lid

[apgodden]

Robin Hood 2B GRP Boot Cover - Kit Car, Sports Car - GRP0082

Has anyone bought & fitted the above?  If so what are your thoughts and any pictures?

Thanks Tony

[Kerry]

I fitted mine a few years ago and its been fine, easy to fit and cover or paint

[Jez Morton]

This came as part of my kit, it does what it needs to do which is cover edges for IVA. I would say it's tricky to get the cuts right around the roll bars and you do need to fill in the middle. I used some 2mm aluminium which I formed to match the rear profile/overhang of the grp. It started of painted Oxford blue but when I changed to orange I wrapped with orange 3d effect vinyl.

[apgodden]

Thanks Jez,

picture really shows it well and gives it a professional finished look.  I have mine ordered.

have you got those seat runners in yet?

cheers Tony

[Davo]

Do you know if this fits the various versions of the Robin Hood?

[Jthorneuk]

Orderded myself on off the back of this thread. Arrived this morning, However im slightly confused on the cutting, I thought it was just cut in half and a bit trimmed off the back sides bit is seems like there are two strips cut off the back edge, 

 

Can anybody confirm before I cut it that my thoughts are correct?

[apgodden]

The two strips at the back are for the sides.

 

cut it as the picture and you won’t go wrong