Jump to content

Sender unit


Jon

Recommended Posts

I have a fuel sender on the table in front of me. The Ohms between the pins (numbered as above) and the earth post are as follows:-

Pin1 float at top (full) = 21
Pin1 float at bottom (empty) = 176
Pin2 top = 200
Pin2 bottom = 67
Pin3 top = 183
Pin 3 bottom = 183

These "top" and "bottom" positions are with the float moved by hand and obviously out of the tank, and without the plug from the loom connected. Also the sender is an old one from the 1986 donor so the rheostat will have worn somewhat, never the less the values match niduncan's, more or less.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...