Jump to content

Double Wishbone Handling Pack


steve1506

Recommended Posts

Yes this is the kit I have to fit, I just wanted a photo of a front corner to check I have everything fitted okay if thats possible do you also have GAZ shocks and did you position the shock mounting U bracket to the lower wishbone in a different place to the standard hole provided.

 

Many Thanks

Link to comment
Share on other sites

  • 1 year later...

A degree or so of negative camber (in at the top) won't hurt.

The limiting factor is you can only rotate the top ball joint in the wishbone by whole turns and still have the taper pointing down to fit in the hub upright. This can make it impossible to get the same camber on both sides.

Link to comment
Share on other sites

A friend with a sliding pillar 2b bought the double wishbone kit and fitted it, I have photos of what needs to be cut and where the brackets go somewhere, send me your email and I’ll look them out for you.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...