Leather hood

[Kenneth Steer]

Hi to you all. I'm new to the kit car world having purchased a Robin Hood EXMO3 around 3 months ago. I need some help with the following, The hood needs some restoration, can anybody advise repair specialist near to me in Aldershot. Secondly, l want to change/replace all of the bushes to the steering rack/roll bar. And thirdly, l want to purchase a new pancake filter for the Weber I was told the donar car for the original build was a Ford Sierra 1986 , any help would be greatly appreciated, regards Ken.

[Sparepart]

One small piece of information - You will need to measure the thickness of the anti roll bar, there are three dimensions, 24mm, 26mm and 28mm, obviously the two bushes that  hold the anti roll bar in place need to be for the thickness of yours. Maybe I should use the word "diameter" not "thickness".

Edited September 29, 2021 by Sparepart
add

[Bob Tucker]

https://www.yell.com/biz/dave-the-trimmer-classic-and-custom-vehicle-upholstery-ltd-camberley-7037779/

https://weber-carbs.co.uk/shop/product/air-filter-weber-dgav-dgv-weber-32-36-38-dgv-dgav-dgev-dgas-dgms-dges-carburettor-air-filter/

The filter is for a DGV Weber, which was fitted to a lot of 2l Sierras. But they also had  different Webers.

Best to confirm  what yours is before ordering, also the height of the existing filter.