Brake clutch n throttle pedal

[Andye69]

Hi all im wanting to asks a question just picked up a part build looking at how the  Brake clutch n throttle pedal are mounted its un usable way to high how are ppl mounting there's love some advice as i need to alter it

[Bob Tucker]

On my 2B I made a false floor from 3/4 ply and glued carpet on top.....dainty size 7s!

[Sparepart]

Luckily my standard size 10 feet seem to work well with the position of the Sierra pedal box on the Exmo, so the clutch and brake pedal positions are ok, however the throttle pedal was not in a good place to indulge in a bit of "heel and toe". This was easy to remedy because the throttle pedal is idependent of the pedal box and is easily moved up or down as long as you are willing to make a new hole for the cable to run out from the top of the pedal.  Lowering the pedal box to lower the pedals would not be easy on the Exmo, and would bring the brake servo/ master cylinder even closer to the hot exhaust pipe. The Bob Tucker solution sounds simple and effective, an example of "vertical thinking".....

[Leslie Walters]

I did the same as Bob on my Haynes Roadster, it looks great when covered with the rubber matting that I used for the rest of the floor, also added a heel rest. (Personal preference I think).