Roof bars fitting

[Brian75]

Could someone please provide some photos of how the roof bars are set up for a 2B? I've searched for photos/explanations but can't find anything and can't work out how the 2nd smaller bar is fitted and relates to the bigger front leaning bar. 

I did find a powerpoint file with pictures posted by Richyb66 a while back with dimensions/design of the actual bars but struggling for details on the set up. Any help appreciated!

[Longboarder]

Pics below.A lot of trial and error with the mounting point to tub position, length of each vertical and horizontal element and mounting point of rear shorter bar. You can get close straight off easily enough and then just cut and weld the elements to fine tune the fit.

Screen position is critical. Not to far forward or back. Fit screen poppers. Then fit only the poppers across the back panel, not the sides. Then fit the frame and adjust for best look. Note tensioning between roll hoop and front bar, not between the two bars.

[Brian75]

Thanks for this, much appreciated.