Jump to content

Jacking points for pair of pneumatic lifts?


darrenb_123

Recommended Posts

D8397DCD-2554-4DC4-B154-74CBE5B1C3DA.thumb.jpeg.c612f46d5cd4d808f35be84dbf4ff178.jpeg5023B3D6-EC1E-45E2-9D0A-F9D0C48C5C78.thumb.jpeg.ce6c72318655b0f849e1dd3b11532c6f.jpeg 
I have just bought an Exmo and about to Jack it up to change fluids etc and have a pair of lifts I usually use but not looking promising for jacking points…..anyone have any advice?

I really like using these lifts as they get the car full off the ground safely and level to help with draining fluids, etc. I have attached photo of the situation.

Link to comment
Share on other sites

At the back the rear subframe is good as it has a large spreader plate bolted on top of the floor.

At the front I have always used the inboard mounting points of the track control arms, I am unsure if your jack system will work for points that far apart.

I once saw a MOT tester jack my car from the rear anti roll bar mounts and cringed but no harm was done.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...