RH S3 geometry

[Snapperpaul]

I have done a huge amount with the car over the last year and am now going to look at the geometry in a bit more detail, currently I have camber wedges on the back and little else, I have looked at the Haynes build your own sports car by Chris Gibbs, some very old notes from Track Developments and came across Caterham CSR settings and this is the confusion I am trying to deal with.

across the 3 the range  for camber front is 0.25-1.5 degrees

rear 0.66-2 degrees

caster 5.5-6 degrees (CSR only)

Toe front 0-0.5

rear 0.16-3

i am tempted to start with the Haynes settings but for now what are other peoples RH S3 settings for Caster, Camber & Toe Front and Rear

thanks