Hazard Lights

[Guest docter fox]

look in the haynes manual for the pic of the clip to see which wire to snip?

 

you could of course just realise you don't have rear wipers and stop pressing the switch

[Longboarder]

Can you remove the column switches and test. Sounds as if the supply to the switches is fused and the output is distributed direct to the front wipers, washers, rears etc. Determine the supply by testing each plug socket in turn with the fuse in and out. Then test the switch and see which output blade only comes live when you operate rear wipers and/or washers.. Then disconnect this/these wires from the output plug.

 

Nigel

[Grim]

sounds like a plan I'll give it a go.

[Guest docter fox]

It arrived this morning and after about 10 minutes of attacking the packaging I fitted it and it worked fine Thanks for the help, the indicator stalk makes a better clicky sound now aswell

[Longboarder]

When I wrap 'em they stay wrapped. Glad it works and fits.

 

Nigel

[Guest chris brown]

the indicator stalk makes a better clicky sound now aswell

That’s probably because it hasn’t been wet as often as your old one.