DeanRudkin
RHOCaR Member
-
Posts
644 -
Joined
-
Last visited
-
Days Won
14
Content Type
Profiles
Forums
Events
Store
Community Map
Everything posted by DeanRudkin
-
Yes sorry been stacked out with work there in my garage
-
I think I’ve got some off my 2b somewhere if they will fit
-
This was from when Chris helped me do my pinto to zetec on bike carbs conversion
-
I used the original master cylinder I’ll get some photos when I’m over at my car next or check out red seven automotive engineering on Facebook my cars on there it may have some useful pics
-
Ok so the servo won’t work there I got rid of it I don’t know if others have managed to make it work I ordered a pedal box from gbs and welded it in
-
I have one in my 2b without seeing your pedal box set up it’s hard to say whether you can use fuel injection or not
-
I’ve got a set of zx9 carbs sat around
-
Tractor fitted one to mine when we did the zetec change but we binned off the accelerator pedal and used the original ford one
-
Rain-x only really works at speed like motorway etc well that’s what I found anyway
-
At very worse case take your rad out take it to a metal fabricators and weld it up
-
Phil shelton has done it on his 2b
-
Depends where it’s bottoming out I used to get a lot on the front end the old plough but you could always raise your suspension
-
The zero wide body one fits if I remember right
-
Mx5 mk1 tomb stone ones
-
Sadly not it would have to be a full respray of the pannel
-
It won’t be to everyone’s taste I know and your more than welcome to come and have a look hopefully it will be at eosb this year
-
Here it is all fitted to the car ready for mapping on Friday
-
Yeah you will need new engine mounts mine are a Diy kit you can buy and weld up your self you can use the same prop shaft if your going to use the type 9 gearbox
-
Mx5 mk1 tomb stone style fit really well
-
Yeah the zetec fits in a 2b no problem
-
Mazda Mx5 ones fit I believe
-
Phil shelton is one
-
Wrap it keep the seam under the tube
-
Ok mate sweet I’m sure they will be similar to the 2B ones
-
Can you get some drawings done and I may be able to make you some
