apgodden

I had same problem. I bought a new dash from Kit Spares. I had the crocodile bonnet off as I was rebuilding the engine. Installed the dash and cut off the excess that was pass the chassis tube...... Ohh school boy error big gaps on top and sides......

Mrs G got elliot dates wrong so elliot will be coming to and will be bringing the kit.....

With Elliot in Paris getting upto no good I will leave the kit at home for this one. So spare seat will be good...

Unfortunately it will just be me.... Is there going to be a ride out? If not will just bring the camper....

We are up for it.....

I have bought a rolling 2b chassis with the idea of getting it sand blasted / powered coated and then to build the car up the way I want then swap my new engine over. This means I can keep my car on the road and enjoy the season. I was thinking of building Elliot "my son who is 13" a car and wondered what's involved in building a Robin Hood with the donor V5 log book?

I managed to get Sparco r100 into my 2b. It took a bit of doing. Had to adjust the seats and then remove the adjuster. I have done 7 hour round trips to shows and these are great comfortable seats. A bargain for £500.

Speak to Steve Kiff at kit spares

I don't have a spare stalk. There are some cheap ones on ebay at the moment £20

A member from South West Robin Hood Kit Car Club on Facebook has a chassis for sale. Item location is Barnstaple North Devon. £350

It is possible. The issue with mine was the printed circuit board for the hazard contacts were badly worn. Took me ages to find it. The only way would. Be to remove the back cover and termove the hazard button. Be careful to keep the stalk in position. If this comes out it's a bugger to get back......

A big thank you to our club secretary Richy "A true gent" My indicator stalk was causing my hazards issues the circuit board was damaged and its mot time..... Richy came to the rescue who had a spare stalk and posted it to me. All fitted and everything is working OK.

Thanks Ivan. I was wondering what the sensor used as a pickup. Will get a start on it today.......

Anyone installed ETB speedo and sensor. If so any advice and any pictures

Saw these on ebay Good price...... Ebay#185225140047

Has anyone got spare indicator stalk with hazard switch....

Got the hazard switch working. Now the led gremlins look like they are still there. On indication they work fine fully off and then flashes fully on. On hazards front all very dim and then all flash fully on. Rear a few leds slightly on and then all flash fully on..... See videos attached. VID_20211211_100252.mp4 VID_20211211_100234.mp4

Thanks Jez....

Thanks Ian will have to see what's going on with the setup.....

I need to know if the hazard relay is combined with the indicator relay or are the sperate relays? I have already replaced the indicator relay with a led adjustable flasher rate relay. The indicators work fine..... Hazards do mot work.

Is the indicator relay the same relay as the hazards? I have replaced the indicator relay for a led type and indicators are good but hazards don't work.

Time to get. My car mot and my hazards don't work as I have changed to led lights. Is there a led relay I can purchase?

I used Damertech and Dave is a good guy full. Of knowledge.