miikae
-
Posts
710 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Community Map
Everything posted by miikae
-
Others will know better than i , but some ECU's need the engine to be cranked at a certain RPM before the pump circuit is activated, my old Porsche was like that and i fitted an overide switch just to help starting from cold. Mike
-
If you have a gauge check the fuel pressure is not too high , approx 2-2.5psi as too high a pressure will possible force fuel past the float valve and cause flooding. Mike
-
Firstly i would check the float level is correct , float not split or sticking , float valve is free and sealing ok , lots of info Here I trust the fuel pump pressure is correct for running carbs? Mike
-
Very very sad news indeed , i just hope that this does not mean he is out of F1 for long. Mike
-
Latest sad news is that the driver has died , totaly lost for more words here . Mike
-
Hi Al, i got some long flexible leads made up by Premier when i did my bat isolation switch. Mike
-
Here's one Here Al Mike
-
More pictures of the damaged cars are on the link in post 1, the damage will explain all . Very tragic , very sad , brings tears to ones eyes. Mike
-
Oh yes a rear torque arm fell off Barracello's Brawn , oops sorry Philipe. Mike
-
I have just taken down my popup Gazebo after three years of use , it has suffered the ravages of weather quite well , but the wind was the biggest problem as a couple of the bars had to be repaired , but even so it did its job for that time . Mike
-
Something like This maybe Mike
-
Just bought this item 170361343082 Fuel Pressure Gauge Kit 15 psi (0-1 Barg) for £10 total, i put in a best offer of £8.50 and was accepted , i only wanted the 8mm fittings initialy but was having trouble finding them, so now i have a spare gauge . Mike
-
Hows This Dave Mike
-
Is the red fluid watery as i seem to remember holts did an antifreeze that turned red when contaminated with oil or exhasut gasses etc. I have also known of ATF being used in Manual gearboxes as some rebuilders recomend it, many moons ago we used it in our racing bike gearboxes. Mike
-
A very sad loss as he was a rising star and only 18 yrs . Condolences to John and family. Mike
-
As far as i remember when i fitted a LMA remote "T" for my oil temp & pressure gauges it was NPT Mike
-
Is it This one you are after? Mike
-
Sierra 3-14 LSD diff Linky Mike
-
I bought a motor bike alarm some time ago with remote start but never got around to fitting it as yet , but i do have a fuel isolation valve fitted plus a removable steering wheel which is never left on when parked. Mike
-
Nice one , is that colour Classis RAC Blue by any chance? Old stock Mike
-
Try this 220446008004 Mike
-
I used M8 stainless button head setscrews and bonded with Sikaflex between the supports and the cycle wings for extra strength and piece of mind. Mike
-
Your postmans reading yours , you will have it on monday i bet Mike
-
80F 26C in the shade here with a light breeze too, just did a wee bit on the car and had to come in as i am melting and sticky tape has gone very unnecessary on me . Its a lot cooler inside only 77F Mike
-
Congratulations Al , slowly slowly catch de monkey eh Just hang on tight to your car keys matey. Best wishes to you both . Mike