Mike-16

TACHO NOW SOLD

Sorry no my camera is not working so need a new one, it has a black face with white figures, and the adjustable rev limit pointer is red, I hope this helps...Mike

Vauxhall Xe cam shaft cover with front removed for access to cam belt £20.00 + post Front indicators on stalks new £5.00 + post 2 inch Tacho £5.00 + post or collect

For Sale a really good type 9 gearbox, excellent order only took it out as I thought there was a problem with the selectors, but it turned out to be a dodgy quick shift. £100.00 or near offer

Hi I have a type 9 box send me a PM...Mike

This well built car is for sale to make way for new project, over £9,000.00 spent on car and build. Some of the parts and items fitted are as follows, and the car has done 600mls since this major rebuild Avo coilovers all round, Willwood front callipers drilled and grooved discs, stainless brake pipes, Minilight wheels and Yokohama tyres inc spare, QED throttle bodies and ECU, Magnecor plug leads, full Smiths instrument panel,Halogen headlights, rally design quick shift,Kent Cams and Vernier pullys, and much more. engine was rebuilt inc. new pistons bearings valve guides GM oil pump etc.etc. This car has been built to exacting standards and is a great looker as well as a goer it is finished in cannery yellow with all the usual stainless, it comes with complete wet gear, and an assortment of spares, inc. a type 9 gear box if wanted. £6,000.00 wanted but serious offers below this will be considered as the car must go Car now sold

Hi I got mine from GBSC a couple of quid only...Mike

Very good Sierra 1800 cvh 125k with mot & tax can be driven away, advertising for a friend offers around £200.00 this car is not a scraper. Mike

I had the same problem, fitted smaller bore Master cylider from a KA and no more problem, block the extra conection off with a bleed nipple. Mike

Give Glencoe a call on 01784 843555, they will supply you with all you need, they have just supplied me with one with the fitting kit, 12mm pipe (their recomendation to feed the pump from swirl pot to the injection pump) and a filter with 12mm fitings to go inline before the pump. Hope this helps...Mike

Hi Rich I won't be at Tamworth, and I'm not sure what shows i can attend (pressure of Work) but am keen to have them, so if you could post them to me I will gladly send a cheque to pay postage, if you are in agreement, PM me and we can swap address details. Mike

Thanks Rich, I think it is a job I'll do in the winter, want to get out driving at the moment, but I would like to have yours as spares in case something goes wrong with mine, how much do you want for them please. Mike

Hi Chaps Can anyone tell me if there is an easy way to get the GRP arches off the stainless please, I need to extend them slightly after fitting wider wheels & tyres, they appear to be bonded, with what I havn't got a clue, if they won't come off without knackering them, would GBS have new GRP ones to replace them. Any help will be most appreciated, thanks in advance. Mike

Check on here from someone who knows, but depending on the reg of the doner, emissions is visual only, I have a red top, and when I bought it the previous owner told me of leaning it off, just to pass the MOT, and then re adjusting later, at my testing station, he passes it with a visual check only, am I lucky or is this usual? I don't know, but I,m sure someone in the club will. Mike

replaced mine over the winter but old one is still OK I think it is the 0ld cortina rad, anyway it worked fine you can have it for a fiver plus postage if it is any use to you. Mike 16