-
Posts
4,163 -
Joined
-
Last visited
-
Days Won
304
Content Type
Profiles
Forums
Events
Store
Community Map
Everything posted by richyb66
-
It sounds like you don't have the standard 2B dummy struts. These do have the pin angled relative to the main diameter that goes in the hub.
-
This is a list of the standard parts including those ball joints. https://nw.rhocar.org/parts.htm Check the angular position of the dummy strut in the hub, this will affect the angle of the top ball joint pin
-
Far too cheap.
-
Tbh, looking at the bracket I'm surprised it lasted that long. It looks like the sort of quick prototype I'd make in thin metal before making the proper one in something sturdy.
-
Next Wednesday (30th) , 7PM onwards, Malt Shovel Pub, Coventry Road, Nr Stonebridge, Coventry, CV7 7HL Entrance to the pub car park is off the A452 Chester Road heading North 50 yards from the island. See you there.
-
https://www.rhocar.org/index.php?/forums/topic/24398-mini-wiper-motor-wiring/#comment-189214
-
Just buy yourself a Subaru and save a load of hassle.
-
untilThe 2022 Yorkshire Motorsport Festival has something for everyone, whether you’re a diehard motorsports enthusiast, a family looking for a spectacular family fun day out or a music lover wanting to hear the great bands that are planned, it’s all there on the same 125-acre site just outside Meltham and Holmfirth. We’re already the biggest Motorsport event in Yorkshire and we are very proud to be Britain’s greenest Motorsport Festival too. Full details on their website www.ymsf.net Info about out club stand will be in this thread: https://www.rhocar.org/index.php?/forums/topic/50006-yorkshire-motorsport-festival-24th-to-26th-june-2022/
-
@Dcr88k24 Daniel, as you're a new member in the North East, would you be interested in attending this event?
-
February is a short month, but we're not short on new members. Welcome along to the following people: Stuart M stuart49 Derby David L D2LHR Kirkaldy Paul B paulddbossons Macclesfield Daniel C Dcr88k24 Southport Robert C Soupstone Lanark Russell F Russell Flemming Boston Richard H RichardH St Leonards on Sea Brian S Brian Smith Rugby Michael M Michael Montague Sleaford Remember to post your approximate location on the members map here, it helps people see who else is in their local area and is a good way to encourage members to get in touch with one another. Also a reminder that we have a wide range of merchandise available, featuring the club logo (top left corner of his page) which has the car in a choice of orange, yellow, purple, blue or green. The full range of products can be found here: https://www.redbubble.com/people/rhocar/shop?asc=u
-
If your donor engine number doesn't match the one on the V5 then the V5 won't be any use and you'd have to register it on a Q plate. A 2B isn't a quick or easy car to build but as you've got 4 years to do it, it should be possible. All the info you'll ever need is here on the forum, you just need to be determined and stick with it - actually finishing and getting through IVA is strangely rewarding.
- 1 reply
-
- 1
-
If it's mapped properly it should be ok. If it's not been mapped, you're probably going to fail on emissions.
-
We're still on for tonight. Everyone welcome.
-
Leave it until after IVA or you'll never get the car finished. Sliding pillar conversion has been widely covered before, have a read through some of these threads: https://www.rhocar.org/index.php?/search/&q="pillar conversion"&search_and_or=or The GBS comes with instructions, if you could get hold of a set of these, it would be a good starting point.
-
https://www.ebay.co.uk/itm/254655300105?var=0&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338767030&toolid=10001&customid=eb%3Ag%3Avms%3Aeb%3Ap%3A254655300105%3BCj0KCQiA3rKQBhCNARIsACUEW_YU16ZAcdTJqLHOSQx16pe4nr2A02L_Oz83lplbVMGCAl1puuRHyrMaAuDHEALw_wcB&_trkparms=ispr%3D1&amdata=enc%3A1HHRCKXMaRfWwbGKajbo1wA51&gclid=Cj0KCQiA3rKQBhCNARIsACUEW_YU16ZAcdTJqLHOSQx16pe4nr2A02L_Oz83lplbVMGCAl1puuRHyrMaAuDHEALw_wcB
-
We have our meet next week if you want to come over.
-
Probably £250 for an Autosparks or Premier harness.
-
For the life of me I can't see why people make their own looms unless they're some kind of masochist with too much time on their hands. Looms are available off the shelf, if you hit problems there's no shortage of people to ask for advice and the time it'll save can be spent finishing off other things on the car. btw, I'm someone who's spent many hours sorting out other people's shi**y kit car wiring.
-
untilFor more details, follow this thread: https://www.rhocar.org/index.php?/forums/topic/49906-dirty-duck-camping-2022
-
untilFor more details, follow this thread: https://www.rhocar.org/index.php?/forums/topic/50067-newark-kit-car-show-2022-23-24-july
-
untilFor more details follow this thread: https://www.rhocar.org/index.php?/forums/topic/50064-stoneleigh-national-kit-car-motor-show-2022-1-2-may
-
Meet 7PM onwards, Malt Shovel Pub, Coventry Road, Nr Stonebridge, Coventry, CV7 7HL Entrance to the pub car park is off the A452 Chester Road heading North 50 yards from the island.
-
Meet 7PM onwards, Malt Shovel Pub, Coventry Road, Nr Stonebridge, Coventry, CV7 7HL Entrance to the pub car park is off the A452 Chester Road heading North 50 yards from the island.
-
Meet 7PM onwards, Malt Shovel Pub, Coventry Road, Nr Stonebridge, Coventry, CV7 7HL Entrance to the pub car park is off the A452 Chester Road heading North 50 yards from the island.