Stewart

Looking for someone who has or can change a cable clutch to an hydraulic clutch with a servo on a Mk 1 Zero with a 2Ltr engine and a type 9 gearbox.

Hi all has anyone changed a type nine manual gearbox for an automatic on a 2010 zero with 2ltr pinto engine

Can someone please measure the distance between the rear bulkhead and the top of the roll at behind the seats.I have a shower cover that does not fit we’ll wondered if it was because I have cobra anti roll bars.Stewart 

whats the best recomended spark plug for a non modified 2ltr pinto

What do you guys out there consider to be the best smart charger that can be left all winter to maintain a battery

diluted white vinegar

jasonj1970 has carbon wrapped his zero himself and made a crackin job of it,try contacting him I am certain he would give some advice

A neighbour has given me some diodes he says are suitable they have markings of SKE 1/12.I cannot find the suggested maplins ones on their website

I know side lights do not go through a relay, the feed I picked up to put the side lights on permanently I picked up from the relay

I have LED lights around the front grill this is fed from the relay for the radiator fan,just fitted the new GBS head lights with led side lights.I initially wired the new side lights to come on with the front led`s and then thought this would be illegal as side lights are obligatory lights and should work without the ignition on I then wired it with the sidelight switch as well but this caused feedback and when the sidelights were switched on the ignition came on.how do I stop the power feedback to the ignition

My son-in-law has a aluminium land rover and he allways uses the old fashioned brasso

If I change the rear indicators to led and leave the front with bulbs will an led flasher unit still work all lights correctly or should I just fit resistors.

this is what GBS sent me.

Are there many member close to you? Could be worth considering a new are meet as an option? If existing ones are relocated it will always extend the travel distance for someone. Will never be able to please all.

Surely that is why the original idea was for a rotating area venue

I have the choice of two area meetings both about the same distance away a round trip of aprox eighty miles,not I have an hour to spare or a last minute pop out trip especially when you do not have any wet weather gear.Perhaps if members went to a meeting on their doorstep and liked it they would be more inclined to attend meetings further afield.

It's the Coventry, Warks and West Midlands area meeting and it's here:

 

Malt Shovel Pub, Coventry Road, Nr Stonebridge, Coventry, CV7 7HL

 

http://maps.google.c...ed Kingdom&z=15

 

Entrance to pub car park is off the A452 Chester Road heading North 50 yards from the island

last weds of the month usualy there for 7ish except december..

Why doesn't the monthly meeting move around the area giving all members a chance to attend a meeting fairly close to them

This thread made me smile - Bump steer in the 'WANTED' section - only on the RHOCAR site would we be talking about wanting bump steer. Sorry i have no intellectual input into the thread - just that it made me smile.

Wanted was for the solution not the problem

Mick full marks for that book.

I have a number of suspension design & setup books that the library I worked for

decided to sell for 50p because they werent being lent out much....

Probably because I already had them at home.......

If you cant see it......you cant borrow it....LOL (Laugh Out Loud)

 

Seriously Stewrat,

I think you are looking for a solution to a problem you dont have......

thanks for the info but must say in seventy years its the first time I have ever been called that seriously or otherwise

I was told this morning by a racecar mechanic that because my lower suspension arm and my steering arm were not parallel this could cause bump steer and rose joints were the way to adjust them.

Does anybody know where I can get a rose joint kit for sierra steering rods

looks the dogs b------ks

I used the heater outlet pipe put a drain tap in it and used it to expel air from the system

Red powder coating would look good

Switch knackered.

should one not say cream crackered

power to the switch short switch out lights come on,