Jump to content

shaun_tomo88

RHOCaR Member
 View Profile  See their activity

  • Posts

    137

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by shaun_tomo88

  1. shaun_tomo88
    Looks just like mine did, good clean done the trick for me
  2. shaun_tomo88
    Sorry I thought I replied…… the amount of fibre glass I’d need, then trying to align the nose cone, gel coat repair flat and polishing, just seems a lot of work
  3. shaun_tomo88
    So the yellow rear arches pictured won’t fit a 2b?
  4. shaun_tomo88
    Thanks I’ll get them, worth a try
  5. shaun_tomo88
    Hi all, seen these on Facebook, I’m being told there for a 2B…. How will I know if they are or not, thanks in advance
  6. shaun_tomo88

    2B nose cone

    shaun_tomo88 posted a topic in Wanted

    Looking for a Nose cone for a 2B mine is completely buggered very deep scratches….. can anyone let me know if there’s one for sale, not to bothered about colour….
  7. shaun_tomo88
    PM you mate….
  8. shaun_tomo88
    Thanks I’ll try on my laptop later
  9. shaun_tomo88
    That’s all I can see…. Blank
  10. shaun_tomo88
    Hi all, got to the point of fitting the water pipes on my zetec conversion into my 2B, I haven’t got a clue what pipes go where, could anybody share some pictures with me on how use have done yours, it’s with the Neil Dunn water rail…. All advice much appreciated
  11. shaun_tomo88
    Thanks for letting me know that
  12. shaun_tomo88
    I can’t find people on the forum anymore, How do I do that?
  13. shaun_tomo88
    Filipes H…. Aintree not far from myself, Richy could you please try and get us in contact, same with some of the other new members you’ve posted over the last few months
  14. shaun_tomo88
    That’s the part of my conversion I’ve not liked, the grinder and welder hate both
  15. shaun_tomo88
    Very lucky man
  16. shaun_tomo88
    If use can see the blue circle plate doesn’t seem structural, so I think that could come off, the bit I’ve made red could I take section out and plate in there instead, my first thought was getting the prop made longer, or maybe a spacer in the diff… I don’t know to be honest, all ideas and opinions welcome
  17. shaun_tomo88
    Hi all….. I’m having problems with clearance of my water rail, I’m doing a zetec conversion, the picture you see a gap with the engine lowered, soon as I get it to the height I need it’s touching the tube, is there any way I could cut into the tube and weld a plate in to strengthen it?
  18. shaun_tomo88
    Help please, I was about to fit my zetec this afternoon I can’t find my spigot bearing long shot I know, would anyone have one I could buy, for MT57, not going to wait on eBay again unless I have to took a week to get to me…. Any help much appreciated
  19. shaun_tomo88
    Massive help thanks
  20. shaun_tomo88
    Hi all, starting my zetec conversion this weekend, I purchased a engine mount kit, just wondering if anyone had some pictures of how they go together, not had no joy online, any help would be great
  21. shaun_tomo88
    I’ve just read that seems like the one with the 3 is better
  22. shaun_tomo88
    I know this is a old post…. Just looking through for some tips with my conversion, in the picture here I’ve added in off deans post, there’s a pulley above the water pump isn’t that to direct the pump in the right direction, where could I get that from
  23. shaun_tomo88
    I just don’t want to buy the wrong one, my mates going to time it for me, I really don’t have a clue with any of that
  24. shaun_tomo88
    Try eBay should get one very cheap, and I use to have a focus the same as that many years ago, loved that car just give me some good memories looking at that picture
  25. shaun_tomo88
    Hi all, I’ve purchased a 2.0 blacktop Zetec engine, it was stripped down and inspected by a friend of mine before I purchased it, problem I’m having is what type of cam belt kit do I need, one has 1 tensioner 2 pulleys the other has 1 tensioner and 1 pulley, all advice welcome
×
×
  • Create New...