Jump to content

Recaro Mods


Guest nippykev

Recommended Posts

Guest Andy Rathbone

are you ready for this? hold on i will do a drawing

Explanation

A is a block on the seat 56 mm X 147mm (off the top of my head i will check in the book tonight)

B is 500mm

X is the rear upper seat mount and must be higher than the top of B

measurments will be confirmed tommorrow...

hope this helps

seat_pos.doc

Link to comment
Share on other sites

Guest TerryBarry

As Andy says except the drawing I've got quotes the block as 136 x 53 mm and the height above the block is 450mm.

However, my copy does not have a Issue Number or Date.

I'll be interested to see what Andy confirms

Terry

Link to comment
Share on other sites

Guest jwaterman

as i understand it when the seat belt is attached to the mounting at top, they must not (when no one in seat) go up over the seat back, they can be level or a little higher. As for the bottom mounts i used the seats mounting points. There are some proper measurments but these seem difficult to understand. Mine straps are level at the top, which passed the SVA ok.

 

Hope it helps.

 

John

Link to comment
Share on other sites

Guest Andy Rathbone

Sorry for the delay, in reply but i can now confirm the measurments are what Terry said, i had a look in my sva book. i couldnt see a date or issue number either. happy building

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...