Rear Axle

[Guest bloke]

will be doing this soon and was wondering if theres anything i should know

 

the chassis is swinging on a beer crate alla vid instructions....?

 

look forward to your replies ta

[Guest Guy]

Hi Bloke,

 

This is an interesting thred Click

 

And this Click

 

Hope they give you some food for thort

[Guest bloke]

cheers guy, this will be the first big thing ive done so i want to get it as right as

 

ta again

[Guest Charles B]

As you have read, most people have found that the rear wheels appear to be offset, mine included. I did a load of measuring, and I reckon that the front to rear wheel alignment is spot on, what is out of line is the side rails. I f you look closely from the rear you can see that the left side is twisted more than the right. I just adjusted my wings so that they look the same for the tyres. My car runs straight and drives fine, so I wouldn't worry too much. I did not like the idea of using wheel spacers anyway.

 

Regards

 

Charles

[Guest bloke]

have made a start today and things look ok, cheers charles for the advice ill check it out when the back end is fixed up

 

i was wonderin how high to drill for the diff bolts? i/2 inch down as vid or should i check the prop shaft angle first?

 

soooooo many choices/ questions

all advice greatfully received

[Guest bloke]

have the front an back on

 

can anyone help?

 

how can i effectivly adjust the rear ride hight? so the wheels are horizontal and trailing arms are flat

 

how do i sort out the position for the bottom shock (coil over)? has to clear the bones but how much

 

 

the bones hang down different heights one quite low an the other quite high

 

help!!!!

[Guest Bobby]

Hi

 

Just got my rear axle on my Sub-K...The left wheel seems 1/2 inch further in than the right...eeek

 

what have i done!!!