Zetec Manifold In S7

[flameredturbo]

Hi,

Getting all the bits together for a zetec conversion on my cortina based S7. Seen a couple of exhaust manifolds on kit parts ones for a zero gt the other for a standard zero. Either be suited to mine?

[Guest whiz]

Are you cutting a new hole in the passenger side, or taking the exhaust underneath the engine through the original hole in the side. Either way I bought a stainless steel item from America on eBay cheap but well made it can be cut and welded at the bottom if you need to change the orientation

[flameredturbo]

I was planning on passing it through a new hole and maybe using the old hole as some sort of cold air feed.

How much was it also? The one for kit parts is £200.

Edited December 8, 2013 by flameredturbo

[Guest whiz]

http://www.ebay.co.uk/itm/FORD-FOCUS-2-0L-MK1-ZETEC-EXHAUST-MANIFOLD-MONDEO-98-04-/110610400291?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19c0e4c423

 

it will need modifying but if your getting a new silencer it can be done then. nice big bore on it also this is what I had on my S7

[flameredturbo]

Thanks again.