Autosparks Loom

[Guest mark kingston]

Hi i have a early 2B in which i have fitted an autosparks loom that came with the escort speedo pod and switch gear.

i wish to fit a fancy set of seperate dials and gauges and as electrics is not my strong point and i don't want to reinvent the wheel, was wondering if any one has a list of which colour wires at the multi plug need to go to which gauge and warning light etc?

also to save me looking is the water temp sender an 1/8 or 1/4 bsp fitting?

any help is much appreciated as this will save me hours with an avo and a lot of peace of mind that i will get it right rather than make a cod's of it

best regards

mark kingston

[Guest Battery Bill]

Mark

If you look at the back of your instrument cluster you can just follow the printed circuit to where the wires connect to. If wire a goes to a certain bulb take it out and hold the cluster to the light and "hey presto" you have your wire identified.

Having said that I have spent the night trying to work out the windscreen washer wiring so as you can tell we have not actually finished our wiring yet.

All good fun.