Front Suspension

[Guest HOODS7]

Can anyone please tell me what coilovers are fitted to robin hood s7 front inboard with regards to lbs as im replacing mine and want to make sure correct selection. thanks

[miikae]

Hi , i fitted GAZ coilovers 13"x9" model Gazmatic 130/090 with 130 springs 50mm bore ,

Hope that helps ,

 

Mike

[Guest robinj66]

If they were the Spax units then the springs were 9" x 180 lbs (2.25" diameter) [at least that's what was fitted to my car]

 

There is a lot of advice to the effect that the springs should be a lesser poundage though

[miikae]

I forgot to add that before fitting the Gaz shocks i had removed the ARB and converted it to tie bars as can be seen in my garage . Hence the 130 lb springs .

 

Mike