Exhaust Pipe Reducers - Where ?

[Guest boggybogstar]

I've got myself a lovely shiney new silencer, only problem is it takes a 2.5" pipe and the outlet from the manifold is 2".

 

So -where do I get a reducer from?

 

Demon Tweaks, CBS etc etc - infact everywhere Ive looked only do 2.5 to 2.25.

 

I dont want to stretch/weld anything onto the manifold exit as I'll need that in 3 years time to put the old one back on for an MOT !

 

Help

[spg]

Tony

 

I've not packed one out half an inch,But had good results by wrapping a strip of thinish steel strip round the pipe to make the gap up. Wrap it round a slightly smaller pipe first to make smaller coil then stretch it over with a smear exhuast compound at the start and finish of the coil. Maybe tricky to do as you'll need quite a few wraps. Have tried a motorbike shop

 

Good luck

 

Steve

[Guest bettinson2005]

hi try this ebay 2200446008004 he can also make any size

[Guest boggybogstar]

thanks - This listing (2200446008004) has been removed or is no longer available is all i get from ebay.

[Guest boggybogstar]

and what i need is 64mm down to 48mm outer diametre and 3.5" gap in between them - so about 7.5" over all length (2" at 63mm - 3.5" in the middle then another 2" at 48mm)

[miikae]

Try this 220446008004

 

Mike

[Guest boggybogstar]

that'll do it Mike - excellent thanks, I'll order it now