Wheels (alloy), Carbs (40's) Engine (2.1)

[Guest salty_monk]

4 x Ford Escort/Orion 14" Pepperpot Alloys. In good condition for age but by no means perfect. 185 60 or 65 (can't remember) R14 tyres. All legal, 2 matched, 2 not matched & one is getting close to the mark (5k left in it I reckon..) £50 ono

 

Webber twin 40's. No linkages or manifold. will need a re-build & top cap missing. £200 ono

 

2.1 Pinto, not running (believe oil seal has gone & contaminated clutch but not sure. This came from a modified RS 2000.

205 block 2.1. Big Valve head, polished etc supposedly stage 3. Supposedly 165bhp with the 40's. Dizzy is there, come take a look. £200 including Alloy sump & pickup pipe.

Haven't opened this engine so cannot guarantee it's condition or whether it has all the mods we were told it had. You're welcome to come & take off head etc to find out!! One more point - not sure if the head is unleaded....

 

Oil cooler & sandwich plate to fit pinto. Approx 7 rows, measure about 10" by 5" from memory, can confirm if anyone's interested. £40

[Guest Daren.F]

I would like the engine and oil cooler please Dan

Daren

[Guest salty_monk]

Oil cooler has gone (Already have 3 people who'll take it) so take it as sold...

 

Didn't know they were so popular - should have put the price up

[Guest salty_monk]

Nobody want the carbs? Are they too pricey??

 

See missing top cap on right.

[Guest salty_monk]

underneath

[Guest salty_monk]

Remember no manifold or linkages included in sale

[Guest salty_monk]

Up the trumpets....

[Guest lardy-fatboy]

salty,

ive looked at many sets of carbs weber and dellorto's-40 and 45's

on e-bay and other rally sites and most tend to go for about

£120/£180 for 40's with linkages/trumpets and or manifolds

upto £300+ for 45's complete.

 

i just got my 40 dellorto's from GERMANY (ebay) for £68

so you could say they are a bit pricey but there yours and you charge what you think !

 

only my opinion cheers duncan

[Guest salty_monk]

I had 45's before which went for £380 with all the linkages etc on ebay so assumed this was cheap.

 

Does anyone want them for £150?

[Guest bluehal1]

I sold a set of 40s with linkage,manifold & air filters complete and ready to run for £60 to a rhocar member because i thought this site is to help other robin hood owners find a bargain, so going back to the price your offering i also think they are a bit over priced, maybe if you lowered your price to a bargain price they might sell a bit quicker.

[Guest horncock]

do you still have the engine?

[Guest Daren.F]

no its mine, mine, all mine

[Guest Drewsus]

Daren,

 

You finished rebuilding it yet???

 

Thanks for your help the other week, and the diy welding course was interesting you should of stayed!!!

 

Drew

[Guest Daren.F]

The engine is clean and painted, just needs puting back together, now need an engine management system. Im thinking about megajolt lite, should be good for a laugh as the pcb comes in component form and I dont know the difference between a throttle pot and a coffee pot but its cheep

[Guest Drewsus]

I'll come up and give you a hand one weekend if you want. Its what I do for a living those circuit brd type things!!!!