Steering Shaft

[Guest Martin S]

Can anyone tell me which side of the brake pedal to put the steering shaft, as i've just spent all morning moving it from one side to the other and still can't get it right.

 

Martin

[Guest Battery Bill]

Hi Martin

It squeezes between the Accelerator and the brake. (Just)

Look on our website to see how we fitted ours.

www.billbrown.org.uk

[Guest TerryBarry]

I'd agree with that - for 2b with wishbones and four branch exhaust

I also had to remove right hand side of that lower bearing bracket to get enough clearance between steering shaft and the exhaust.

Terry

[Guest Mr Pid]

Yeh these are right pain, it took me nearly a full week of stripping and rebuilding to get it right.

 

Mines runs past things with only about a mm of clearance, hope mr SVA doesnt get too picky.

 

Goog luck.

 

Stu

[Guest Martin S]

Thank's you guys

 

I've got it sorted not, I also discovered that if you elongate the two servo mounting holes it is possible to rotate the servo.

1mm or so out of the hole makes quite a lot of difference at the end of the pedals, but is not noticeable at the reservoir.

 

Many thanks Martin