Need Shocks ?

[Guest vacinc]

these dont work, at all ( picture ) Were can i get new ones, and what do i ask for, size

[Guest vacinc]

these dont work, at all ( picture ) Were can i get new ones, and what do i ask for, size

heres another veiw

[Derek]

Set the car at the ride height you want (jack up under the diff).

 

Measure the gap between the top and bottom mounting.

 

Go to http://www.gaz-shocks.com/home.html Contact us.

 

Wait for your local distributor to call.

 

Or better still go to http://dynamitepages.com/dampertech/ and email Dave.

He has been very helpful service second to none:

 

Then call Luego and get 2 shock absorber mounting brackets ready made to convert the bottom vertical mount to Horizontal.

 

 

I have got Gaz all round missus is disgusted but the drive is so much better.

[Guest vacinc]

Set the car at the ride height you want (jack up under the diff).

 

Measure the gap between the top and bottom mounting.

 

Go to http://www.gaz-shocks.com/home.html Contact us.

 

Wait for your local distributor to call.

 

Or better still go to http://dynamitepages.com/dampertech/ and email Dave.

He has been very helpful service second to none:

 

Then call Luego and get 2 shock absorber mounting brackets ready made to convert the bottom vertical mount to Horizontal.

 

 

I have got Gaz all round missus is disgusted but the drive is so much better.

cheers, e-mailed him today

[Guest Phil Slater]

Then call Luego and get 2 shock absorber mounting brackets ready made to convert the bottom vertical mount to Horizontal. 

 

Derek

 

I've just placed an order with Dampertech I presume the Leugo brackets are the right size for the Dampertech shocks? I was gonna make up a set but if Luego sell them cheaply I might as well buy a pair. One more question did you have to alter the upper mounts for the new dampers?

 

TIA

 

Phil Slater

[Derek]

Phil,

 

I have 2 washers 1 either side of the bush to make up the difference in the Luego bracket. This is the same in the top mounting.

 

As I remember the brackets were £7-£8 with post, pack and pratting about. They are based in Peterborough just in case you are close and save you PPP.

 

Derek.

[Guest Phil Slater]

Derek

 

Thanks for that. I'm down in Plymouth so not that close to Peterborough

 

As there will be a bit of delay on delivery of my dampers i might have a goat making up a set first. If not successful I'll order somne!

 

Thanks again

 

Phil Slater