2.0 Pinto Efi Bits Wanted

[NeilD]

Has anyone got spare 2.0 Pinto EFI bits

 

Want:-

EFI bit of wiring loom / ECU / Ignition module

 

to try and cure a really annoying and intermittant misfire - HELP!!!

[NeilD]

Suspect it is the ignition module - anyone ??

Beer tokens waiting!

[Guest Twoscoops]

Suspect it is the ignition module - anyone ??

Beer tokens waiting!

 

 

If your still looking I've got an ECU. The details are as follows:-

 

EEC-IV

EFI-VM100

85BBY2A650-CIA

E43F-CA(Red)

 

If it any use to you then give me a shout.

[NeilD]

Thanks but ECU I am looking for is 86FB 12A297 AA unless anyone knows if they are compatible ?

 

In the meantime I got an ignition module off e-bay Germany for 15 euros which didn't resolve - but I've solved it ( loose wire at the ECU connector! )

 

A spare efi ECU would certainly be useful - anyone ?

[Grim]

how did you discover the loose wire at the ecu?

[NeilD]

How it got sorted

 

Engine was running fine - then did its old trick of misfiring like a ...... and then cut out altogether.

Having changed dizzy cap, rotor arm, leads, plugs, ignition module I poked my hand under the dash and eventually found by gently pulling on the loom to the ecu I could make the problem come and go - dashboard out - sorted out the wiring and it hasn't misfired since! Also my ecu was mounted on the ford holder thingy and was vibrating like a vibratey thing - put in a piece of dense foam between it and the chassis tube to dampen the vibration which I think caused the problem in the 1st place.

Just when I was ready to throw my toys out of the pram as well

[Grim]

my toys are well out of the pram, in fact they're in *bleep*ing orbit!!!!!